tube socket वाक्य
उदाहरण वाक्य
मोबाइल
- The lead spacing was originally intended to allow plugging the device into a then-common tube socket.
- After loss of power, a phase dropped, the cooling for the tube and tube socket ceased.
- The tube socket melt down into the power supply and then the transmitter was beyond repair.
- There were only a few types of tube socket, so it was easy to make a mistake.
- Transformers, large capacitors, tube sockets and other large components were mounted to the top of the chassis.
- Since the unusually high voltage can be potentially dangerous, most fixtures have an automatic cutoff switch in the tube sockets.
- Only these 3 address lines are connected to internal Tube sockets, as found in the BBC Master or Universal Second Processor Unit.
- In the 1950s, printed circuit boards were introduced and tube sockets were developed whose contacts could be soldered directly to the printed wiring tracks.
- Amphenol was founded in Chicago in 1932 by entrepreneur Arthur J . Schmitt, whose first product was a tube socket for radio tubes ( valveholder bases ).
- Tube sockets were typically mounted in holes on a sheet metal chassis and wires or other components were hand soldered to lugs on the underside of the socket.
- As the Loewe set had only one tube socket, it was able to substantially undercut the competition since, in Germany, state tax was levied by the number of sockets.
- Matching plugs were also manufactured that let tube sockets be used as 8-pin electrical connectors; penurious experimenters would sometimes salvage the base from a discarded tube for this purpose.
- In vacuum tube technology, a "'top cap "'is a terminal at the top of the tube envelope that connects one of the electrodes, the other electrodes being connected via the tube socket.
- This Emerson set also had a single tube socket, but because it used a four-pin base, the additional element connections were made on a " mezzanine " platform at the top of the tube base.
- Some miniature tube sockets had a skirt that mated with a cylindrical metal electrostatic shield that surrounded the tube, fitted with a spring to hold the tube in place if the equipment was subject to vibration.
- In 1932, he founded American Phenolic Corp ( which became Amphenol ) when he discovered that insulating plastic could effectively be used to produce tube sockets in a quicker and simpler method than using Bakelite or ceramic.
- A secondary board provides the base onto which the tube sockets are mounted ( although the pair of power tube sockets are mounted directly on the chassis with long leads connecting those to the secondary board ).
- A secondary board provides the base onto which the tube sockets are mounted ( although the pair of power tube sockets are mounted directly on the chassis with long leads connecting those to the secondary board ).
- "' Tube sockets "'are electrical sockets into which vacuum tubes ( also known as valves ) can be plugged, holding them in place and providing terminals, which can be soldered into the circuit, for each of the pins.
- Most vacuum tubes have a limited lifetime, due to the filament or heater burning out or other failure modes, so they are made as replaceable units; the electrode leads connect to pins on the tube's base which plug into a tube socket.
tube socket sentences in Hindi. What are the example sentences for tube socket? tube socket English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.